Classes: 5th Mech
Date of Assignment 10.18.17
SolidWorks 3D Parametric Design Tool
EQ(s): What SolidWorks functions are needed to design a keychain?
Assignment - Designing a Keychain:
Date of Assignment 10.18.17
SolidWorks 3D Parametric Design Tool
EQ(s): What SolidWorks functions are needed to design a keychain?
Assignment - Designing a Keychain:
-Units: IPS
-New Sketch on Top Plane
-Draw using the center Rectangle tool a
box 3” long and 1.75” tall.
-Fillet all corners a radius of .25”
-Finish the sketch and extrude the
profile .100”
-New Sketch on the Front Plane and draw a
circle with its center on the top edge and the radius point tangent to the
bottom (.200”).
-Finish the sketch and select the top
surface of the keychain. Use the Convert
Entities Command to select each line segment making up the top
Use the Sweep Feature. The Sweep needs two separate unconsumed sketches - one is the Profile, and one is the Path. The circle will serve as the Profile and the top edge of the keychain will serve as the Path. Select each in turn in the dialog box and generate the Sweep.
Add a .25" diameter hole located .25" from the top and side. Place your lettering as desired at least .25" tall and extrude to a .050" thickness.
Comments
Post a Comment